ElectromechanicsYear 2

Electromechanics: Linear Variable Differential Transformer (LVDT)

livear differential variable transformer

A Linear Variable Differential Transformer (LVDT) is a displacement transducer, used to measure displacement, based on the effect of the mutual inductances. It is also used in some hydraulic applications, steam control and pressure measurement.

Figure 1 shows the structure of an LVDT, which consists of the primary winding, excited by an AC source, displacable magnetic core, and two secondary windings, connected to the output voltage.  The displacement distance  determines the mutual coupling of the primary and secondary windings. The middle position of the core corresponds to the zero output voltage.

EM02FIG01
Figure 1

Let’s consider the primary coil with the parameters:

Rc and LC, then iRc+Lcdidt=vAC

So voltages induced in the secondary winding are:

v1=M1didt, v2=M2didt,

Here M1 and M2 are mutual inductances between the primary and secondary windings. Where M1 and M2 are depend on the position of the magnetic core. So:

vout=v1v2=(M1M2)didt

An LVDT is designed in a way that vout is linearly dependent on the position r of the magnetic core. If the core is displaced closer to M1, v1 increases and v2 is decreases. If the core is displaced closer to the Mwinding, v2 increases and v1 decreases. If the core is displaced closer to the winding,  increases and  decreases. As the excitation signal is the AC signal, the vout will be an AC signal as well.

It’s amplitude and phase are dependent on the magnetic core r position. The output vout  signal is the Amplitude-Modulated (AM) Signal. One of the applications of the LVDT is a position balancing detector. The LVDTs sensor has evolved since the time it was first designed and implemented as a very useful technology for reliable measurements into applications for different industries, like industrial, military, aerospace, sea, and so on.

The modern LVDT sensor is upgraded with a microcontroller and innovative construction materials, and the supporting electronics are often already included in the LVDT package.

Figure 2. The modern LVDT sensor, TE Connectivity (*1, 2)
EM02FIG03
Figure 3. The changing of output voltage depending on the core position (*3)

[1] Engineering Principles and Applications of Electrical Engineering, 3rd edition, Rizzoni.
[2] Modern LVDT’s in new applications in the Air, Ground and Sea, John Matlack, 2010
[3] TE Connectivity, White Paper, Linear Variable Differential Transformer.

#3 Magnetic Reluctance Position Sensors

Tags:

Leave a Reply